Paxton Hardware and Rental

Variable-speed dial settings from 1,400-2,000 RPM. Brush-type skirt surrounds sanding pad, preventing gouging of wall joints and aiding in dust collection. Motor located on opposite end of handle from sanding head, providing balance and control. Built-in dust collection hose.

This tamper is ideal for tamping asphalt, gravel, stone, and dirt. The high quality ash handle is flexible and durable. The heavy 10.6-lb. steel head makes a great tool for heavy duty construction, industrial, and commercial applications.

Patented oil-injected system provides reliable performance by eliminating spark plug fouling and carbon buildup. The no-mix system is an added convenience for operators. Plus an amazing fuel to oil ratio of 120:1 allows for longer and cleaner run times... up to 65 hours on a single tank of oil. A low oil shutdown switch prevents running the rammer without oil, for trouble free operation. Exclusive air filter compensation system allows for longer run time between filter changes

40', Aluminum, Type IA, Extension Ladder, 300 LB Duty Rating, Quick Latch, Safety Rung Lock, Mar-Resistant End Caps, Swivel Safety Shoes, D-Shaped Rungs, Meets OSHA, CSA, & ANSI Standards, Rope & Pulley, Modified I-Beam Construction.

15 Amp, 120V Demolition Hammer

14 Amp, 120V Combination Hammer

13.6 Amp., 120V Demolition Hammer

Garrett Metal Detector

14" Metal Cutting Chop saw used for cutting any ferrous metals such as rebar, steel studs, pipe, threaded rod, angle iron, etc

Everything that makes chain saws the preferable method in cutting concrete, stone and masonry is found in a powerful 6.4 hp (94cc) saw. Deep straight cuts up to 16" and square corners with ease of use and dependable performance to match. Maximum 14" depth of cut.

Built to meet the operational and flexibility demands of the general construction market. With 5hp from a 76cc engine, the dependable 680GC is the perfect saw for the smaller openings. 12" depth of cut.

Dry areas quickly with this compact, three-speed blower.
Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more.
Ensure durability and many years of use with this blower's rotationally-molded body

Onfloor Compact 20" with 2-12V 105A/H batteries, 24V/12A C50 automatic charger w/ Pad Driver
 
 Onfloor 20 is a reliable and durable scrubber with the features you need to increase the productivity and efficiency of your cleaning program. Has in brush/pad assist drive and traction drive.
 
 Onfloor Striker 20" (510 mm) Scrub Path, 24 Volt System, Brush Assist, Standard Squeegee, Stand Alone Charger

48" Floor Scraper, 4" Blade

12" Floor Scraper, 4" Blade

Centrifugal pumps designed to keep your jobsite dry. With its radial flow design and built-in contractor friendly features, this line of trash pump has redefined the quality and durability standards of self-priming centrifugal trash pumps. These 3-inch trash pumps can handle solids up to 1.5 inches

Flairing Tool, 45° SAE Flares, model 345/150

Cutter 1/8"-2", Heavy-Duty 2-A

48" Pipe Wrench, lightweight aluminum 848

36" Pipe Wrench lightweight aluminum 836

Pipe Wrench 24" steel

The 470 Portamatic TL pneumatic flooring nailer is designed to nail ¾” thick wood flooring and includes a shoe pad for nailing ½” wood flooring Designed to accept 1-1/ 2 or 2” Flooring nails T OR L Flooring nails. You choose the Porta-Nail flooring fastener T or L based on the style you are now using or style that is readily available to you. Operates at 4.2 cfm @ 90psi. A light tap of the mallet ensures the Porta-Nail is set tight in the proper location every time for a wood floor that stays put. The Portamatic TL is light weight; easy to use has an integrated safety to prevent accidental discharge. Porta-Nails 16 ga. flooring nails are made of the finest materials and well defined serrated barbs to provide superior holding power and will not let go. Porta-Nails are also available in stainless steel for ACQ treated materials. Cat # 47090 Wide Profile Shoe is available to position Portamatic TL in front of tongue to provide balance and protecti&l

The easy to use 461A Flooring Stapler is the fast and cost effective way to secure 1/ 4 In. to 5/8 In Engineered and Bamboo Wood Flooring, Today’s floors can present installation challenges due to the various dimensional profiles of the flooring. PNI’s commitment to provide solutions for the hardwood flooring installer is once again displayed with this easy to use Stapler that will adjust for various thicknesses and will accommodate three different lengths of fasteners. Bamboo and Engineered floors are easy to install and stay in place when stapled into proper sub floor systems. The 461A uses 1 In. to 1-9/16 In. 18 ga 1/4 In. crown staples. The 18 gauge staple provides superior holding power and its thin profile can help to prevent de-lamination of engineered flooring. The 461A’s adjustable shoe bases along with the adjustable Elevator Platform, for fine tuning the position of the staple, give you the versatility to obtain professional installation results with